Your region: United States

Caterpillar SKID STEER LOADER 249D - catalog of spare parts

Dimensions

Ground clearance - 0.7 feet in

Bucket Pin Height - Maximum Lift Height - 9.9 Feet

Height - Cab Top - 6.7 Feet in

Total track length - 71.2 inches

Length - Track on the ground - 54.5 inches

Length - Without Bucket - 99.3 Inches

Length - with bucket on the ground - 127.3 inches

Maximum total height - 150.8 inches

Bucket Finger Height - Carry Position - 8.6 inches

Clearance at maximum lift and unload - 88.7 inches

Departure angle - 34.5 degrees

Maximum reset angle - 48 degrees

Rear Upright Angle - Maximum Height - 87.5 degrees

Pin Bucket Lug - Maximum Lift - 12.2 Inches

Achieve - Maximum Lift / Drop - 28.6 inches

Vehicle Width (400 mm / 15.7 in tracks) - 69.1 inches

Turning radius from the center - rear of the machine - 57.4 inches

Center Turn Radius - Clutch - 45.7 inches

Maximum reach - with arms parallel to the ground - 51.8 inches

Center Turn Radius - Bucket - 81.1 inches

Vehicle Width (320 mm / 12.6 in tracks) - 66 inches

Choose SKID STEER LOADER 249D section:

Specifications

engine

Net power - 65.8 hp

Displacement - 134.3 ts per

Hole Diameter - 3.3 Inches

Stroke - 3.9in

Net Power - ISO 9249 - 66.5 HP

Gross Power - SAE J1995 - 67.1 HP

Engine Model - Cat C2.2 CRDI

Net Power - SAE 1349 - 65.8 HP

Peak Torque - 1,500 rpm - SAE J1995 - 153 lb-ft

Power train

Travel Speed ​​- Forward or Backward - 7 Miles per Hour

Weights

The note

Operating Weight, Performance, and Dimensions, All Based on the Operator 75 kg (165 lbs), All Liquids, 1676 mm (66 in.) Trash Can, 320 mm (12.6 in.) Track, Standard Hydraulic Flow System, C0 Cabin (OROPS , static seat), 880 CCA battery, quick coupler, without self-leveling and additional counterweights (unless otherwise indicated).

Hydraulic system

Hydraulic Flow - Standard - Loader Hydraulic Pressure - 3336 psi

Hydraulic flow - Standard - Loader hydraulic flow - 18 gal / min

Hydraulic flow - Standard - Hydraulic power (rated) - 35.5 hp

Hydraulic flow - high flow rate - hydraulic power (calculated) - 50.9 hp

Fluid Flow - High Flow - Loader Hydraulic Pressure - 3,336 psi

Hydraulic flow - high flow rate - loader hydraulic flow - 26 gal / min

Operational characteristics

The note

Operating Weight, Performance, and Dimensions, All Based on the Operator 75 kg (165 lbs), All Liquids, 1676 mm (66 in.) Trash Can, 320 mm (12.6 in.) Track, Standard Hydraulic Flow System, C0 Cabin (OROPS , static seat), 880 CCA battery, quick coupler, without self-leveling and additional counterweights (unless otherwise indicated).

Rated Operational Power - 50% Tipping Load - 2,300 lbs

Nominal Operating Power - 35% Tipping Load - 1,610 lbs

Nominal Working Capacity with Extra Counterweight - 2,500 lbs

Tipping Load - 4600 lb

Breakout Force - Tilt Cylinder - 3963 lbs.

Land contact area - C 400 mm / 15.7 crawler - 1716in2

Ground Pressure - From 400mm / 15.7 Crawler - 4.6 psi

Ground Contact Area - From 320 mm / 12.6 per track - 1373in2

Ground Pressure - From 320 mm / 12.6 per lane - 5.6 psi

Service replenishment options

Cooling system - 3.2gal

Fuel tank - 15.1 gallons

Hydraulic tank - 9 gal

Crankcase - 2.6gal

Hydraulic system - 11.9 gal

Taxi

ROPS - ISO 3471: 2008

FOPS - ISO 3449: 2005 Level I

FOPS Level II - ISO 3449: 2005 Level II

Air conditioning system

Air conditioning

The air conditioning system on this unit contains the fluorinated greenhouse refrigerant R134a (global warming potential = 1430). The system contains 0.81 kg of refrigerant with a CO2 equivalent of 1.158 metric tons.

Noise level

Note (1)

Cab and Roll Over Protective Structures (ROPS) are standard in North America and Europe.

Note (2)

** Declared dynamic sound pressure levels of the operator according to ISO 6396: 2008. The measurements were carried out with the doors and windows of the cabin closed and at 70% of the maximum engine cooling fan rotation speed. Sound levels may vary at different speeds of the engine cooling fan.

Note (3)

*** The indicated sound power level for marked CE configurations when measured in accordance with the test procedure and conditions specified in 2000/14 / EC.

Inside the cab ** - 83 dB (A)

External cab *** - 103 dB (A)